Polypropylene faced on front side, natural kraft paper backing on back side. Lowest priced. Generally used in a typical metal building application that does not require heavy facing. Industry standard. |
Polypropylene faced on front side, metallized polyester backing on back side. Provides a higher permeability than WMP-VR. Generally used in a typical metal building that does not require heavy facing. Most Common. |
Polypropylene faced on front side, white kraft paper backing on back side. Slightly heavier than WMP-VR. Generally used in a typical metal building application when walls are exposed to
light to moderate traffic. |
Polypropylene faced on front side, metallized polyester backing on back side. Twice as heavy and strong as WMP-VR-R. Generally used in a typical metal building when walls are exposed to heavy traffic. |
Polypropylene faced on front side, polyester fabric backing on back side. Woven product. Generally used in sporting facilities and high traffic areas where walls are exposed to heavy traffic and abuse.
|
Black matte Polypropylene faced on front side, kraft paper or metallized polyester backing on back side. Generally used when designer doesn’t want to draw attention to roof or ceiling. Lower cost than painting. |
